LED: Premium CREE XP-G2 R5 LED

Battery: 2 x AA

Maximum output: 345 lumens

Output / runtime:

• Turbo: 345 lumens / 2 h 15 min
• High: 138 lumens / 5 h
• Medium: 55 lumens / 12 h
• Low: 15 lumens / 50 h

Special mode: SOS and Strobe

Peak Beam Intensity: 5,800 cd

Beam Distance: 166 yards

Size: 6.10 inch (L) x 0.89 inch (Head D) x 0.85 inch (Tube D) ( 155 mm x 22.56 mm x 21.5 mm )

Weight: 2.36 oz ( 67 g) (without battery)

Waterproof: IPX8

Impact Resistance: 1.5 m

Material: Aluminum alloy with type III Hard Anodizing

Package Contents: Flashlight x 1, Clip x 1, Lanyard x 1, Spare plastic cap x 1, Spare O-ring x 1.

Switching ON/OFF: Press the button on the tailcap until a “click” is heard.
Mode Switching: The Nitecore MT2A has two modes: Turbo and user-defined. Simply tightening and loosening the flashlight head switches between two modes.

• Turbo Mode: Turbo mode provides maximum light output and can be accessed when the MT2A flashlight head is tightened. Momentary illumination can be achieved by lightly pressing the switch. Note: After three minutes’ using of turbo mode, the flashlight will lower its output automatically to prevent from overheating, and prolong the battery run time.
• User-Defined Mode: User-defined mode changes light brightness and functions and can be accessed by slightly loosening the flashlight head. In this mode, lightly pressing the switch will cycle through following modes: “High-Mid-Low-SOS-Strobe”. Pressing the switch all the way down saves current setting.