Home > FIREARMS & ACCESSORIES > AR-15 STORE > AR-15 ACCESORIES
Sort By:
Page of 1
AR15 extractor Oring MAGPUL MOE ENHANCED POLYMER TRIGGER GUARD MAGPUL SLING MOUNT KIT - TYPE 1 - BLACK
Enhance your AR15 or 308 AR10 Type extractor reliability by adding one of these Mil-Spec Fluorosilicone O-rings to your bolt assembly. If your rifle, carbine, or pistol AR15 is having reliability problems related to extracting this may be your most affordable fix and at worst will be a benefit regardless.

Similar to Armalite EB0065, but able to withstand higher temperatures.

This trigger guard not only gives you a bit more room for your finger, it fills the gap between the receiver, an area that gives some users blisters, and looks better than the original design.
Upgrade your MOE fixed rifle or fixed carbine stock with this plus a quick detach swivel to be able to quickly remove your sling under tactical situations, storage, or for use on another rifle.

See type 2 for UBR,STR
See type 3 for ACS, ACS-L
MAGPUL MIAD/MOE CR123A BATTERY STORAGE CORE MAGPUL MIAD/MOE AA BATTERY STORAGE CORE MAG416 Light Mount V-Block and Rings
Internal core unit for the MIAD® as well as the MOE®, MOE-K2®, and MOE® AK Grips* designed to hold two (2) CR123A lithium type batteries in a self contained, water resistant unit. Rubber cap is captured to the unit and can be opened with a push of the thumb.
Made in U.S.A.
Today modern rifles commonly wear weapon lights, thermal imagers, and lasers that work in conjunction with helmet mounted PVS-14s. In order to keep these force multipliers up and running requires a healthy supply of batteries. Enter the internal core unit for the MIAD as well as the MOE, MOE+, MOE-K2, and MOE AK Grips.

Designed to hold two (2) AA type batteries in a self contained, water resistant housing. Included internal spacer provides rattle free storage of either (2) AAA or (2) N size batteries (commonly used for EOTech sights).

The rubber cap has two sides with marking to identify "spent" batteries and can be opened with a push of the thumb.

Made in U.S.A.
Mounts on MAGPUL MOE light mounts and is perfect for mounting any light with a body diameter between .75"-1.040". We recommend one of our NITECORE USB rechargeable 18650 Lithium cell bodied flashlights so you are never left in the dark.
Magpul polymer cantilever rail/light mount for your M-LOK MOE and Aluminum rails MAGPUL M-LOK Offset Light Polymer Mount MAG605 M-LOK QD SLING MOUNT - BLACK
Designed to be compatible with all M-LOK mounting surfaces, this M-LOK Polymer Cantilever Rail/Light Mount is a great way to attach your mission critical MIL-STD-1913 Picatinny spec rail-mounted accessories, such as lights and optics, and directly interfaces with Scout Lights or Magpul Light Mount V-Block and Rings and a NITECORE USB rechargeable tactical light. This Cantilever Rail/Light Mount's Picatinny slots extend forward .75"-1.5" past the M-LOK mounting slot decreasing shadowing, improving ergonomics, all while keeping lights and accessories low to reduce the weapon's profile. The Cantilever Rail/Light Mount also features beveled ends and corners to reduce snagging and sharp edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

3 MIL-STD-1913 Slots, max overall length of 3.15"

Made in the U.S.A.

*M-LOK accessories will not fit into the MOE slots without modification. MOE accessories, however, will work on an M-LOK slot with a small adapter plate.*
This Magpul M-LOK Offset Light Mount is a perfect ambidextrous weapon-light mounting platform. Position at your choice of the 11 o'clock or 1 o'clock position on any brand of M-LOK compatible railed for-ends Made from a lightweight, durable, and strong proprietary polymer, this mount features beveled ends and corners to reduce snagging and chaffing.

Mount allows for the direct attachment of flashlights such as
Surefire® M300/600 series of Scout Lights® or other MIL-STD-1913 Picatinny light and optic mounts

Use in combination with MAG416 (Magpul Light Mount V-Block and Rings) and
our USB Rechargeable 18650 Lithium powerhouse flashlights like the; NITECORE CI16, MH27, MH20, P10, or with AA powered flashlights such as the NITECORE MT2A or MT21A, or with any other flashlights that have a diameter from 0.75 to 1.03 in.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
The M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning.

All hardware necessary for attachment directly to M-LOK Slots is included and and no modifications to the M-LOK hand guard or forend is required.

Made in the U.S.A.
ERGO KeyMod WedgeLok Slot Cover Grips 4 Pack - OLIVE DRAB GREEN ERGO KeyMod WedgeLok Slot Cover Grips 4 Pack - BLACK ERGO KeyMod WedgeLok Slot Cover Grips 4 Pack - DARK EARTH
Flexible non slip rubber for KeyMod WedgeLok Rails Flexible non slip rubber for KeyMod WedgeLok Rails.
Flexible non slip rubber for KeyMod WedgeLok Rails
ERGO KeyMod WedgeLok Slot Cover Grips 4 Pack - GRAPHITE GREY MAGPUL M-LOK BIPOD MOUNT MAGPUL Rail Light Mount 11 O Clock
Flexible non slip rubber for KeyMod WedgeLok Rails
The Magpul M-LOK Bipod Mount allows for the attachment of Harris-style stud mounted bipods to M-LOK compatible hand-guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market.
The Rail Light Mount fits on any standard 1913 Picatinny Rail, is available in right or left side models, and integrates with the Magpul XTM panels. It positions the weapon light high and cantilevered forward, at the 11 o'clock or 1 o'clock position, to allow a more forward support hand position, keep the light tucked in close to the bore, and to minimize barrel shadow. A textured thumb ramp is integrated to provide the user an index point, aiding consistent hand placement and light activation.

Constructed of reinforced polymer, the Rail Light Mount nearly eliminates light compatibility concerns by conveniently including everything you need to mount Surefire 300 and 600 series Scout Lights, 1913 Picatinny attachment pistol lights, and all light bodies from 0.75" to 1.03" in diameter via the included set of anodized aluminum mounting rings.

Models are available to position the light high at 11 o'clock (LEFT side model) or one o'clock (RIGHT side model).

Made in U.S.A.
MAGPUL MOE M-LOK MID-LENGTH HAND-GUARD - FDE MAGPUL MOE M-LOK MID-LENGTH HAND-GUARD - BLK MAGPUL M-LOK MID-LENGTH HAND-GUARD - OLIVE DRAB GREEN

The Magpul MOE M-LOK Hand-Guard for AR15/M4 rifles combines the light weight of a standard hand-guard with modular flexibility.

Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Made in U.S.A.

The Magpul MOE M-LOK Hand-Guard for AR15/M4 rifles combines the light weight of a standard hand guard with modular flexibility.

Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Made in U.S.A.

The Magpul MOE M-LOK Hand-Guard for AR15/M4 rifles combines the light weight of a standard hand-guard with modular flexibility.

Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Made in U.S.A.

M-LOK CANTILEVER RAIL/LIGHT MOUNT MAGPUL AR15 BEV Block Aero precision AR-15 lower parts kit with trigger
Designed to be compatible with all M-LOK mounting surfaces, this M-LOK Aluminum Cantilever Rail/Light Mount is a great way to attach your mission critical MIL-STD-1913 Picatinny spec rail-mounted accessories, such as lights and optics, and directly interfaces with Scout Lights or Magpul Light Mount V-Block and Rings and a NITECORE USB rechargeable tactical light. This Cantilever Rail/Light Mount's Picatinny slots extend forward .75"-1.5" past the M-LOK mounting slot decreasing shadowing, improving ergonomics, all while keeping lights and accessories low to reduce the weapon's profile. Machined from milspec-anodized aluminum, the Cantilever Rail/Light Mount also features beveled ends and corners to reduce snagging and sharp edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

3 MIL-STD-1913 Slots, max overall length of 3.15"

Made in the U.S.A.

*M-LOK accessories will not fit into the MOE slots without modification. MOE accessories, however, will work on an M-LOK slot with a small adapter plate.*

The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc.

Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability and included Pin keeps upper in proper position.

The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance, etc.


Features

  • Provides support for all AR15/M4 upper and lower receivers
  • Solidly engages barrel extension with steel lugs
  • Full-length steel support shank
  • Body made from the same high-quality polymer as other Magpul products

Specs

  • BEV™ Block – AR15/M4
    • Weight: 11.2 oz.
A great lower parts kit from one of the industry's biggest manufacturers made with mil spec dimensions and coatings. This kit includes the trigger components.
SB TACTICAL SBA3 AR15 PISTOL BRACE - BLACK SB TACTICAL SBA3 AR15 PISTOL BRACE - FDE
Designed to work with all platforms that are designed to accept mil-spec carbine receiver extensions, the SBA3 is made similarly with 5 adjustment positions Designed to work with all platforms that are designed to accept mil-spec carbine receiver extensions, the SBA3 is made similarly with 5 adjustment positions