SCHMID 6-POSITION MIL-SPEC 7075 ALUMINUM BUFFER TUBE WITH 4 THROUGH HOLES & DRY FILM LUBRICANT is a quality carbine-length AR receiver extension built from impact-extruded 7075 aluminum and finished with Type III hard coat anodizing. For builders who care about getting the small parts right, this is the kind of component that brings real value where it counts: proper material, proper finish, and practical features that support reliable long-term use.

The standout detail here is the 4 through-hole design or "drain holes", and that is the real-world advantage: if water gets into the stock and receiver extension area, the added through holes give it a path to get out instead of staying trapped. That is critical for hard-use rifles that must function in the real world where water is present.

The other major advantage is the dry film lubricated interior. Dry film lubricant is commonly used inside mil-spec receiver extensions as a low-friction interior coating, and results in smoother cycling, reduced spring drag, and added corrosion resistance as the benefit. In plain terms, that means a receiver extension that helps the buffer and spring move more smoothly inside the tube and can also help cut down on the harsh scraping feel and noise that cheaper, rougher tubes sometimes produce.

If you want a mil-spec 6-position buffer tube that goes beyond mil-spec, this Schmid unit gives you the strength of 7075 aluminum, the wear resistance of Type III hard coat anodizing, the practical utility of four through holes, and the smoother interior function of dry film lubricant in one clean package.

Shop more AR-15 parts and accessories at Huckleberry Arms.

AR-15 Store | AR-15 Lower Parts | Buffer Tubes & Receiver Extensions