|
|
|
|
|
|
|
|
|
|
|
|
|
Enhance your AR15 or 308 AR10 Type extractor reliability by adding one of these Mil-Spec Fluorosilicone O-rings to your bolt assembly. If your rifle, carbine, or pistol AR15 is having reliability problems related to extracting this may be your most affordable fix and at worst will be a benefit regardless.
Similar to Armalite EB0065, but able to withstand higher temperatures.
|
Mil-spec. receiver extension end plate. For use on AR15 carbines with an adjustable stock.
Made in the USA
|
Mil-spec receiver extension lock nut (castle nut) for use on AR15 carbines with an adjustable stock. Perfect for your new build or as a direct replacement for worn out parts.
Made in the USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use this when mounting your A2 or similar flash-hider on barrels threaded with 5/8X24 TPI. It is suitable for Aero Precision's and most other manufacturers' 308 Winchester, 300 Blackout, and 6.5 Creedmoor chambered barrels and more.
|
Use this when mounting your A2 or similar flash-hider on barrels threaded with 5/8X24 TPI. It is suitable for Aero Precision's and most other manufacturers' 308 winchester, 300 Blackout, and 6.5 Creedmoor chambered barrels and more.
|
M5 .308 rifle buffer spring for use in .308 AR's with a fixed buttstock. Perfect for your new build or as a direct replacement for worn out parts. Note: Will not work with .308 carbines with a collapsible stock.
Made in the USA.
LIMIT 2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Armalite buffer spring is for a .223 Caliber and has an overall length with a Max of 13-1/2" and a Min of 11-3/4".
|
Classic Mil-spec A2 Flash-hider
|
This trigger guard not only gives you a bit more room for your finger, it fills the gap between the receiver, an area that gives some users blisters, and looks better than the original design.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Extended Magazine Catch Button is a drop in replacement for the standard lower receiver magazine catch button. This extended button is longer, allowing it to protrude the proper distance when used with our M5 Lower Receiver. Made from Aluminum.
|
Custom pivot pins are made to work with the Aero Precision M5 lower. They will work with DPMS- pattern lowers as well, but will stick out further.
|
Custom takedown pins are made to work with the Aero Precision M5 lower. They will work with DPMS- pattern lowers as well.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Like the more familiar A2 flash-hider found on the venerable M16/M4 series of rifles, this version is threaded with 5/8X24 TPI and is suitable for Aero Precision's and most other manufacturers' 308 Winchester, 300 Blackout, and 6.5 Creedmoor chambered barrels and more.
|
Did you launch a detent and spring across the garage during your build and now you can't find it? This Fix-It Kit gets you the most commonly lost parts to finish your build.
All parts in the Fix-It kit are compatible with AR15, M4E1 and M5 builds
|
Help protect your hands from the rough edges on your picatinny rails, burns when doing magazine dumps, and frostbite when operating in cold environments and look good doing it with these Magpul Ladder Rail Panels.
Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Help protect your hands from the rough edges on your picatinny rails, burns when doing magazine dumps, and frostbite when operating in cold environments and look good doing it with these Magpul Ladder Rail Panels.
Made in U.S.A.
|
Help protect your hands from the rough edges on your picatinny rails, burns when doing magazine dumps, and frostbite when operating in cold environments and look good doing it with these Magpul Ladder Rail Panels.
Made in U.S.A.
|
- Stainless Steel
- Pistol-length
- Roll-pin included
- For AR15 and 308 ARs
- Made in USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Internal core unit for the MIAD® as well as the MOE®, MOE-K2®, and MOE® AK Grips* designed to hold two (2) CR123A lithium type batteries in a self contained, water resistant unit. Rubber cap is captured to the unit and can be opened with a push of the thumb. Made in U.S.A.
|
Today modern rifles commonly wear weapon lights, thermal imagers, and lasers that work in conjunction with helmet mounted PVS-14s. In order to keep these force multipliers up and running requires a healthy supply of batteries. Enter the internal core unit for the MIAD as well as the MOE, MOE+, MOE-K2, and MOE AK Grips.
Designed to hold two (2) AA type batteries in a self contained, water resistant housing. Included internal spacer provides rattle free storage of either (2) AAA or (2) N size batteries (commonly used for EOTech sights).
The rubber cap has two sides with marking to identify "spent" batteries and can be opened with a push of the thumb.
Made in U.S.A.
|
Internal core unit for the MIAD as well as the MOE(R) and MOE-K2(R) Grips* designed to hold one (1) standard AR15/M4 complete bolt and firing pin, the perfect place to store critical back-up parts to keep your rifle running under the worst case senario.
Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mounts on MAGPUL MOE light mounts and is perfect for mounting any light with a body diameter between .75"-1.040". We recommend one of our NITECORE USB rechargeable 18650 Lithium cell bodied flashlights so you are never left in the dark.
|
Push-button quick-detach sling swivel for 1-1/4" webbing, compatible with QD sling attachment points. Manganese-phosphate finished steel. Combine with MS1 Sling for dedicated two-point sling, or with MS1 MS4 Adapter for two to one-point convertible sling.
Made in the U.S.A.
|
Upgrade your MOE fixed rifle or fixed carbine stock with this plus a quick detach swivel to be able to quickly remove your sling under tactical situations, storage, or for use on another rifle.
See type 2 for UBR,STR
See type 3 for ACS, ACS-L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A high-performance component designed for pistol-length gas systems in AR-15 pistols and short-barreled rifles (SBRs). Crafted from Melonite-treated steel, this gas tube offers exceptional durability and corrosion resistance, ensuring reliable gas flow and consistent cycling in compact firearm configurations.
The Melonite treatment enhances the surface hardness and wear resistance of the gas tube, making it ideal for high-stress environments. Whether you're building a custom AR-15 pistol or SBR, the AERO PRECISION MELONITE PISTOL LENGTH GAS TUBE is engineered to deliver reliable performance in a compact package. Made in USA
|
The Pachmayr Pac-Mag gun concealment magnet is made to hold almost any gun; pistol, revolver, rifle, or shotgun almost anywhere. Rated to hold up to 35 lbs and the non-marring overmoulded rubber protects your firearms finish. The low profile is great for concealment in tight places.
|
The MIAD/MOE Lube Bottle Core is an internal grip core with an included 1/2 oz reusable lubrication bottle to hold the oil of your choice.
Comes standard with the MIAD® GEN 1.1 Grip, the Lube Bottle Core also works with the MOE®, MOE-K2®, and MOE® AK Grips*. *NOTE: Not compatible with the original modular MIAD grip (MAG050) Made in the USA. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A specialized component designed for carbine-length gas systems in AR-15 rifles. Crafted from Melonite-treated steel, this gas tube offers exceptional durability and corrosion resistance, ensuring reliable gas flow and consistent cycling in carbine-length configurations. The Melonite treatment enhances the surface hardness and wear resistance of the gas tube, making it well-suited for the higher pressures and rapid cycling associated with carbine-length gas systems.
Whether you're building a custom AR-15 rifle or upgrading an existing one, the AERO PRECISION MELONITE CARBINE LENGTH GAS TUBE is engineered to deliver reliable performance and longevity in this specific gas system configuration.
Made in U.S.A.
|
Crafted from Melonite-treated steel, this gas tube offers exceptional durability and corrosion resistance, surpassing traditional stainless steel options. The Melonite treatment, also known as nitriding, creates a robust, wear-resistant surface that enhances the overall strength and service life of the gas tube. Its advanced material composition ensures reliable gas flow and consistent cycling, even in demanding shooting conditions
|
- Stainless Steel
- Carbine-length
- Roll-pin included
- For AR15 and 308 ARs
- Made in USA
|
|
|
