|
|
|
|
|
|
|
|
|
|
|
|
|
Enhance your AR15 or 308 AR10 Type extractor reliability by adding one of these Mil-Spec Fluorosilicone O-rings to your bolt assembly. If your rifle, carbine, or pistol AR15 is having reliability problems related to extracting this may be your most affordable fix and at worst will be a benefit regardless.
Similar to Armalite EB0065, but able to withstand higher temperatures.
|
Mil-spec. receiver extension end plate. For use on AR15 carbines with an adjustable stock.
Made in the USA
|
Mil-Spec carbine buffer spring for use in AR15 carbines and pistols with a collapsable butt-stocks or braces. Perfect for your new build or as a direct replacement for worn out parts. Note: Not for use on rifles models with a fixed rifle stock.
Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mil-Spec rifle buffer spring for use in A2 and A4 AR15 rifles with a fixed buttstock. Perfect for your new build or as a direct replacement for worn out parts. Note: Not for use on carbine models with a collapsible stock. Made in the USA.
|
Mil-spec receiver extension lock nut (castle nut) for use on AR15 carbines with an adjustable stock. Perfect for your new build or as a direct replacement for worn out parts.
Made in the USA
|
Use this when mounting your A2 or similar flash-hider on barrels threaded with 1/2X28 TPI. It is suitable for Aero Precision's and most other manufacturers 5.56X45 NATO, 223 Remington, 300 Blackout, and similar chambered barrels and more.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Armalite buffer spring is for a .223 Caliber and has an overall length with a Max of 13-1/2" and a Min of 11-3/4".
|
Classic Mil-spec A2 Flash-hider
|
This trigger guard not only gives you a bit more room for your finger, it fills the gap between the receiver, an area that gives some users blisters, and looks better than the original design.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Extended Magazine Catch Button is a drop in replacement for the standard lower receiver magazine catch button. This extended button is longer, allowing it to protrude the proper distance when used with our M5 Lower Receiver. Made from Aluminum.
|
Did you launch a detent and spring across the garage during your build and now you can't find it? This Fix-It Kit gets you the most commonly lost parts to finish your build.
All parts in the Fix-It kit are compatible with AR15, M4E1 and M5 builds
|
Help protect your hands from the rough edges on your picatinny rails, burns when doing magazine dumps, and frostbite when operating in cold environments and look good doing it with these Magpul Ladder Rail Panels.
Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Help protect your hands from the rough edges on your picatinny rails, burns when doing magazine dumps, and frostbite when operating in cold environments and look good doing it with these Magpul Ladder Rail Panels.
Made in U.S.A.
|
Help protect your hands from the rough edges on your picatinny rails, burns when doing magazine dumps, and frostbite when operating in cold environments and look good doing it with these Magpul Ladder Rail Panels.
Made in U.S.A.
|
This is the standard 3oz weight carbine buffer, perfect for you AR15 carbine or pistol.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Stainless Steel
- Pistol-length
- Roll-pin included
- For AR15 and 308 ARs
- Made in USA
|
This is the AR15/M4/M16 magazine that all other magazines are judged against. A combat proven magazine that just keeps on going where other lesser magazines fail. This magazine offers superior feeding, impact resistance, corrosion proof, and more!
Works great with 55.6x45mm Nato, 223, 300 blackout. You should consider having at least 10 for each AR in your inventory.
|
This DSG buffer is for a .223 caliber, has an overall length of 5 7/8", and weighs 5.2 oz.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you are looking for a shorter mag for your AR-15 that is lighter to carry and shorter for shooting in the prone or bench-rest, then this is the magazine for you. All of the refinements you can expect from the GEN3, dust-cover, over-travel insertion stop, and slimline floor plate.
Works great with 55.6x45mm Nato, 223, 300 blackout.
|
Internal core unit for the MIAD® as well as the MOE®, MOE-K2®, and MOE® AK Grips* designed to hold two (2) CR123A lithium type batteries in a self contained, water resistant unit. Rubber cap is captured to the unit and can be opened with a push of the thumb. Made in U.S.A.
|
Today modern rifles commonly wear weapon lights, thermal imagers, and lasers that work in conjunction with helmet mounted PVS-14s. In order to keep these force multipliers up and running requires a healthy supply of batteries. Enter the internal core unit for the MIAD as well as the MOE, MOE+, MOE-K2, and MOE AK Grips.
Designed to hold two (2) AA type batteries in a self contained, water resistant housing. Included internal spacer provides rattle free storage of either (2) AAA or (2) N size batteries (commonly used for EOTech sights).
The rubber cap has two sides with marking to identify "spent" batteries and can be opened with a push of the thumb.
Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Internal core unit for the MIAD as well as the MOE(R) and MOE-K2(R) Grips* designed to hold one (1) standard AR15/M4 complete bolt and firing pin, the perfect place to store critical back-up parts to keep your rifle running under the worst case senario.
Made in U.S.A.
|
The next-generation PMAG 20 GEN M3 is a 20-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.
While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK(R) 416/MR556A1/M27 IAR, British SA-80, FN(R) SCAR(TM) MK 16/16S, and others.
|
Mounts on MAGPUL MOE light mounts and is perfect for mounting any light with a body diameter between .75"-1.040". We recommend one of our NITECORE USB rechargeable 18650 Lithium cell bodied flashlights so you are never left in the dark.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Push-button quick-detach sling swivel for 1-1/4" webbing, compatible with QD sling attachment points. Manganese-phosphate finished steel. Combine with MS1 Sling for dedicated two-point sling, or with MS1 MS4 Adapter for two to one-point convertible sling.
Made in the U.S.A.
|
Upgrade your MOE fixed rifle or fixed carbine stock with this plus a quick detach swivel to be able to quickly remove your sling under tactical situations, storage, or for use on another rifle.
See type 2 for UBR,STR
See type 3 for ACS, ACS-L
|
The PMAG 17 GL9 is a 17-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds.
High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 17rd indicator windows. Drops free loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.
The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip.
*NOTE: May not be compatible with other platforms designed for use with Glock magazines due to a wide range of magwell designs and tolerances.
Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PMAG 15 GL9 is a 15-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds.
High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 15rd indicator windows. Drops free loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.
The PMAG 15 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip.
*NOTE: May not be compatible with other platforms designed for use with Glock magazines due to a wide range of magwell designs and tolerances.
Made in U.S.A.
|
Similar to the ever popular Gen2 PMAG, but with several refinements including: a paint-pen dot-matrix for easy labeling your pet magazines for specialty ammo, over-travel stop ribs, flared floor plate, aggressive texture, and pop-off impact/dust-covers.
Works great with 55.6x45mm Nato, 223, 300 blackout
|
A high-performance component designed for pistol-length gas systems in AR-15 pistols and short-barreled rifles (SBRs). Crafted from Melonite-treated steel, this gas tube offers exceptional durability and corrosion resistance, ensuring reliable gas flow and consistent cycling in compact firearm configurations.
The Melonite treatment enhances the surface hardness and wear resistance of the gas tube, making it ideal for high-stress environments. Whether you're building a custom AR-15 pistol or SBR, the AERO PRECISION MELONITE PISTOL LENGTH GAS TUBE is engineered to deliver reliable performance in a compact package. Made in USA
|
|
|
