The Ruger 90231 is a genuine factory 10-round magazine for compatible Ruger Mark IV and Mark III pistols chambered in .22 LR. It is the right choice for an owner who wants a replacement magazine, additional range magazines, or factory OEM magazines to keep a rimfire pistol running with the fit and feed geometry Ruger intended.
Rimfire pistols can be more magazine-sensitive than many centerfire handguns. Feed angle, follower movement, spring tension, cartridge presentation, and magazine-catch engagement all matter. Starting with a genuine Ruger factory magazine helps avoid introducing an aftermarket variable into a pistol that may otherwise run well.
This magazine is for compatible Ruger Mark IV and Mark III pistols. It is not the correct magazine for the original Mark I, Mark II, or 22/45-style pistols. Ruger Mark-series names are similar enough that it is easy to order the wrong magazine if the exact model is not confirmed first.
Before ordering, verify the pistol model, grip frame style, magazine release arrangement, and current magazine design. If your pistol is a Mark I, Mark II, Mark IV 22/45, Mark III 22/45, or another 22/45 variant, select the correct magazine for that specific pistol instead of this Mark IV / Mark III magazine.
A Ruger Mark-series pistol is most useful when it is easy to shoot often. Extra magazines let the owner spend more time practicing sight alignment, trigger control, reload habits, and general marksmanship instead of stopping after every single magazine to reload.
Spare factory magazines are also useful for keeping range sessions organized. A shooter can keep several magazines loaded at the bench, dedicate certain magazines to practice or match use, and replace a damaged or worn magazine without taking the pistol out of service.
The 90231 magazine uses a 10-round .22 LR capacity, E-nickel steel body, black base plate, and black follower. The side loading assist button makes loading rimfire cartridges easier during longer sessions, especially when filling multiple magazines before a drill, class, or informal plinking session.
As with all rimfire firearms, ammunition selection still matters. Different .22 LR loads can vary in feeding, ignition, extraction, and accuracy. Test your preferred ammunition with each magazine before relying on the combination for a match, field use, or a long range day.
The Ruger 90591 BX-25 is a genuine factory 25-round magazine for compatible Ruger .22 LR firearms, including the 10/22 family. This clear-sided version gives the shooter the familiar BX-25 capacity and factory Ruger feed geometry while making it easier to visually check remaining ammunition at the bench, on the range, or during a long plinking session.
Factory magazines matter on rimfire rifles because .22 LR feeding is sensitive to cartridge presentation, feed-lip geometry, spring pressure, and follower movement. Starting with a genuine Ruger BX-25 helps avoid one of the common variables that can affect reliability in a 10/22-pattern rifle or compatible Ruger rimfire host.
The clear-sided body is the useful difference. A standard black BX-25 gives the same general extended-magazine role, but the translucent side panels make it easier to confirm whether the magazine is loaded, partially loaded, or nearly empty. That is helpful when several magazines are on the bench, in a range bag, or being used during informal drills.
The 25-round capacity also reduces reload interruptions. For a 10/22 used for plinking, steel targets, rimfire practice, small-game preparation where lawful, or general range work, a BX-25 lets the shooter spend more time behind the rifle and less time loading a single flush-fit rotary magazine over and over.
The BX-25 clear-sided magazine is intended for compatible .22 LR Ruger firearms that accept BX-25 magazines, including factory original 10/22 rifles, SR-22 rifles, 22 Charger pistols, .22 LR Ruger American Rimfire rifles, and .22 LR Ruger 77/22 rifles.
It is not for Ruger Mark-series pistols, LCP II .22 pistols, Wrangler revolvers, 10/22 Magnum rifles, .22 WMR firearms, .17 HMR firearms, or other platforms that require a different magazine design. Confirm the exact firearm model and chambering before ordering.
The BX-25 uses a polymer body, polymer follower, steel feed lips, and a curved detachable-box-magazine format. Ruger describes the factory BX-25 magazine as tested to feed as reliably as the standard BX-1 10-round rotary magazine, while the steel feed lips give the magazine a durable cartridge-control surface for repeated use.
As with all rimfire firearms, ammunition choice still matters. Different .22 LR loads can vary in bullet profile, lubrication, velocity, ignition consistency, extraction, and accuracy. Test your preferred ammunition with each magazine before relying on the combination for a match, class, hunt, or extended range day.
This magazine has a 25-round capacity and may not be legal to ship to or possess in every jurisdiction. Magazine-capacity restrictions vary by state and locality. Confirm your local laws before ordering.
The Ruger 90062 is a genuine factory 9-round magazine for compatible Ruger Mark I Old Style pistols chambered in .22 LR. It is the correct choice for an owner who wants a replacement magazine, a few extra range magazines, or a factory magazine to keep a classic Mark I running with the fit and geometry Ruger intended.
Older rimfire pistols can be particular about magazines. Feed angle, follower movement, spring tension, and magazine-catch engagement all matter. Starting with a genuine Ruger factory magazine is the sensible way to avoid introducing an aftermarket fitment variable into a vintage Mark I pistol.
This magazine is for Ruger Mark I Old Style pistols. It is not the correct magazine for Ruger Mark II, Mark III, Mark IV, or 22/45 pistols. Those later Mark-series pistols use different magazine designs, and the names are similar enough that it is easy to order the wrong magazine if the exact pistol model is not confirmed first.
Before ordering, verify the firearm model, magazine release location, and current magazine style in your pistol. If your pistol is a later Mark II, Mark III, Mark IV, or 22/45 variant, select the correct magazine for that model instead of this Mark I Old Style magazine.
A rimfire pistol is most useful when it is easy to shoot often. Extra magazines let the owner spend more time practicing sight alignment, trigger control, reload habits, and general marksmanship instead of stopping after every single magazine to reload.
For a classic Ruger Mark I, spare factory magazines are also worth having simply because the pistol has been out of regular production for decades. Keeping a few dependable magazines with the firearm helps preserve its usefulness as a range pistol, kit gun, or family rimfire pistol.
The 90062 magazine uses a blued steel body and 9-round .22 LR capacity. The side loading assist tab makes rimfire loading easier, especially during longer sessions, while the factory magazine format preserves the profile and handling expected from the original Mark I platform.
The Ruger 90646 is a genuine factory value 2-pack of 10-round magazines for compatible Ruger Mark IV 22/45 pistols chambered in .22 LR. It is the right choice for an owner who wants additional range magazines, replacement factory magazines, or a more efficient way to keep a Mark IV 22/45 running during longer shooting sessions.
Rimfire pistols can be more magazine-sensitive than many centerfire handguns. Feed angle, follower movement, spring tension, cartridge presentation, and magazine-catch engagement all matter. Starting with genuine Ruger factory magazines helps avoid introducing an aftermarket variable into a pistol that may otherwise run well.
This magazine 2-pack is for compatible Ruger Mark IV 22/45 and Mark IV 22/45 Lite pistols. It is not the correct magazine for standard Ruger Mark IV pistols with the traditional grip frame, Mark III pistols, Mark III 22/45 pistols, Mark I, Mark II, or other Mark-series variants that require a different magazine design.
The names are close enough that it is easy to order the wrong magazine. Before ordering, verify the exact pistol model, grip-frame style, magazine release arrangement, and current magazine design. If your pistol is not a Mark IV 22/45-pattern pistol, select the magazine Ruger lists for your specific model instead.
A Ruger Mark IV 22/45 is most useful when it is easy to shoot often. Extra magazines let the owner spend more time practicing sight alignment, trigger control, reload habits, and general marksmanship instead of stopping after every single magazine to reload.
The value 2-pack is especially practical for range bags, classes, rimfire matches, youth instruction, and any day where several loaded magazines make the session smoother. It also gives the owner a ready spare if one magazine is damaged, lost, or set aside for troubleshooting.
Each magazine uses a 10-round .22 LR capacity and E-nickel steel body. The side loading assist button makes loading rimfire cartridges easier during longer sessions, especially when filling multiple magazines before a drill, class, or informal plinking session.
The DNZ Freedom Reaper Picatinny Rail PRBAR is a black one-piece optics rail built for Browning BAR rifles. It gives the BAR receiver a 1913 Mil-Spec Picatinny mounting surface for compatible scopes, red dots, and optic mounts.
DNZ Freedom Reaper Picatinny Rails are machined from 6061-T6 aluminum and finished in black anodizing for a durable, clean-looking scope base. The one-piece rail provides a straightforward way to upgrade a Browning BAR hunting rifle with a more flexible optics mounting platform.
Browning BAR Optics Upgrade: The Browning BAR is a proven semi-automatic hunting rifle, and a Picatinny rail gives shooters more flexibility when mounting modern optics. This DNZ rail provides a continuous rail surface for scope rings, red dot mounts, and other compatible Picatinny optic mounts.
1913 Mil-Spec Picatinny Rail: The Freedom Reaper rail is made to 1913 Mil-Spec dimensions, giving shooters a compatible mounting platform for standard Picatinny scope rings and optic mounts.
6061-T6 Aluminum Construction: The aluminum body keeps the rail lightweight while providing a solid mounting surface. The black anodized finish helps resist wear and corrosion while reducing glare.
Installation Note: DNZ lists Freedom Reaper rail screws as 6-48 x 1/4" and using a 7/64" Allen wrench. Always verify screw length, receiver fit, thread engagement, and torque recommendations before installation to avoid damage to the receiver or mounting screws.
Related Gear: Browse more Optics & Mounts, shop additional Browning products, or pair your rifle with compatible centerfire rifle ammunition.
HECKLER & KOCH OEM P30 / VP40 .40 S&W 13-ROUND MAGAZINE is built to HK's renowned standards of reliability, strength, and fitment precision. Constructed from hardened steel with a durable blued finish, this factory magazine ensures flawless feeding and long-term durability in both P30 and VP40 pistols.
HK engineers each magazine to meet strict specifications, using high-tension steel springs, smooth-feeding followers, and a robust polymer base plate. Whether for duty, training, or defensive carry, OEM HK magazines offer the reliability and longevity serious shooters demand.
Unmatched strength. Uncompromising precision. The DNZ Game Reaper 1" Medium Mount for Browning BAR, Long Action BLR, and Benelli R1 rifles is a true one-piece mount machined from a solid block of top-grade 6061-T6 billet aluminum.
Engineered for perfect receiver alignment and maximum shock absorption, this mount eliminates the need for separate bases and rings. Its lightweight, rugged design resists temperature extremes and recoil stress better than steel—all while being up to 67% lighter.
Every Game Reaper is custom-made in North Carolina and tailored to the exact specifications of the listed platforms, ensuring secure scope retention in any environment.
The HK USP45 12RD MAGAZINE EXTENDED FLOORPLATE (.45 ACP) – 215957S is a factory Heckler & Koch magazine built specifically for full-size USP45 pistols. Designed for proper fit, consistent feeding, and long service life, this is the magazine the platform was engineered around—not an aftermarket compromise.
Configured for 12 rounds of .45 ACP, this version features the extended floorplate, providing additional grip surface and improved control during reloads. On a full-size duty pistol like the USP45, that added purchase translates into more positive handling and faster, more confident manipulation under use.
Constructed with a steel magazine body, factory spring, and follower geometry tuned by HK, this magazine delivers the reliability the USP series is known for. Whether used for training, defensive staging, or duty applications, it maintains consistent performance across a wide range of ammunition types.
This listing reflects the current HK commercial packaging (215957S / UPC 642230244092), ensuring what you receive matches exactly what is ordered. An internal HK reference part number may also exist, but this is the correct retail configuration supplied through U.S. distribution.
For USP45 owners, additional factory magazines are not optional—they are part of maintaining readiness, reducing downtime, and supporting a proven handgun with the components it was designed to run.
Shop more HK magazines, handguns, and accessories at Huckleberry Arms.
Magazines | Handguns | Optics & Mounts
