Dead Air Nomad Ti OTB FDE .30 Cal Suppressor
The Dead Air Nomad Ti OTB combines the lightweight construction of the Nomad Ti family with an over-the-barrel configuration designed to keep a suppressed rifle shorter and better balanced. Rather than placing the suppressor’s entire length in front of the muzzle, the OTB body extends rearward around a compatible barrel.
The result is a full-size 7.65-inch suppressor that adds only 4.6 inches beyond the muzzle. Its 3D-printed 6AL-4V Grade 5 titanium construction holds total weight to just 10.5 ounces, making it especially well suited to hunting rifles, precision rifles and other configurations where overall length and forward weight matter.
This FDE model features a high-temperature Cerakote finish and a .30-caliber bore rated by Dead Air for cartridges through .300 Remington Ultra Magnum and 7mm Backcountry, subject to the manufacturer’s barrel-length, energy and firing-schedule restrictions.
Important OTB fitment requirement: The suppressor overlaps the barrel behind the muzzle and accommodates barrels up to 1 inch in diameter. Verify the complete barrel profile and clearance behind the muzzle before ordering. The Nomad Ti OTB is not compatible with Browning Xeno Recoil Hawg muzzle brakes.
Integral Xeno Mounting System
Dead Air machines the Xeno mounting architecture directly into the suppressor. The Nomad Ti OTB threads onto a compatible Xeno muzzle device using the system’s left-hand thread and taper interface.
A DA870 Xeno Radial Brake with 5/8-24 threads and a .30-caliber bore is included. The DA870 does not require timing, simplifying installation on compatible barrels. The suppressor may also be used with other properly installed and caliber-compatible Dead Air Xeno muzzle devices, except the Browning Recoil Hawg family.
Designed for Hunting and Precision Rifles
The rearward blast-chamber volume reduces the amount of suppressor extending ahead of the muzzle, helping the rifle point more naturally while retaining the sound and recoil-management benefits of a full-size centerfire suppressor. Dead Air rates the Nomad Ti OTB for bolt-action and semiautomatic use; it is not full-auto rated.
Manufacturer Part Number: NOMADTIOTBFDE
UPC: 810128163927
Finish: Flat Dark Earth high-temperature Cerakote
Nomad Ti OTB: Now Shipping
Fitment, Mounting and Transfer Information
Confirm the Barrel Profile Before Ordering
The Nomad Ti OTB is not a conventional suppressor that sits entirely in front of the muzzle. A portion of its body extends rearward over the barrel. The barrel must measure no more than 1 inch in diameter throughout the overlapped section, with sufficient unobstructed clearance around the barrel.
Confirm that the barrel profile, front sight, gas block, handguard and any other nearby components will not interfere with the suppressor body. If there is any uncertainty, contact Huckleberry Arms or Dead Air with the firearm and barrel specifications before ordering.
Integral Xeno Interface
The Nomad Ti OTB has Dead Air’s Xeno mounting architecture machined directly into the suppressor. It does not use a separate removable Xeno-to-HUB adapter. The suppressor attaches to the included DA870 brake through a left-hand threaded Xeno interface and taper.
The included DA870 has 5/8-24 barrel threads and a .30-caliber bore. It does not require timing. Firearms with a different muzzle thread will require a properly threaded, caliber-compatible Xeno muzzle device that also provides adequate OTB clearance.
Do not use a Browning Xeno Recoil Hawg muzzle brake. Dead Air specifically identifies the Recoil Hawg family as incompatible with the Nomad Ti OTB.
What Is Included
- Dead Air Nomad Ti OTB suppressor in FDE
- Factory-installed R-Series .30-caliber front cap
- DA870 Xeno Radial Brake, 5/8-24 with .30-caliber bore
- OTB wrench
- Manufacturer documentation
Installation and Safe Use
Suppressor performance and safety depend on correct muzzle-device installation, concentric barrel threads, a square barrel shoulder and proper bore alignment. Follow the current Dead Air owner’s manual and have a qualified armorer perform or verify installation when appropriate.
- Verify suppressor-to-bore alignment with a correctly sized alignment rod before live fire.
- Keep the Xeno threads and taper clean and free from debris.
- Use only compatible ammunition within Dead Air’s published caliber, energy and barrel-length limits.
- This titanium suppressor is not full-auto rated. Follow the manufacturer’s intended bolt-action and semiautomatic use limitations.
- Suppressors become extremely hot during use and can cause severe burns or damage nearby equipment.
- A suppressor does not make a firearm silent. Always use appropriate eye and hearing protection.
NFA Transfer Required
This product is a federally regulated silencer and cannot be shipped directly to the purchaser. Transfer and possession require all applicable federal, state and local approvals.
When transferred through another qualified dealer, Huckleberry Arms will generally transfer the suppressor to that dealer through the applicable dealer-to-dealer ATF process. The receiving dealer then handles the purchaser’s applicable ATF transfer application. The suppressor cannot be released to the purchaser until approval is received.
Government charges, dealer transfer fees, fingerprinting, photographs and other processing expenses are separate unless expressly stated otherwise. NFA items may ship separately from firearms, ammunition and ordinary accessories. The purchaser is responsible for confirming eligibility and local legality before ordering.
Warranty
Dead Air provides a conditional lifetime warranty against manufacturing defects or breakage associated with intended normal use. Modified, abused, neglected or misused products—and damage caused by host firearms, ammunition, installation errors or other excluded circumstances—may not be covered. Warranty determinations are made by Dead Air under its current policy.
Legal and Export Notice
All federal, state and local laws apply. No direct-to-consumer shipment or release will occur without the required approval. This product is intended for lawful domestic sale and use; export or foreign transfer requires all applicable U.S. government authorization.