A Compact ODG M-LOK Control Point
The Die Free Co FULL STOP is a machined aluminum accessory that can function as a hand stop, finger stop or barricade stop on a compatible M-LOK handguard. It gives the support hand a defined physical reference without consuming the rail space or adding the bulk of a full-length forward grip.
This version features an olive drab green Type III anodized finish for woodland, field and mixed earth-tone rifle builds. At only 0.8 ounce, the FULL STOP adds useful indexing and leverage without noticeably changing the rifle's balance.
Hand Stop, Finger Stop or Barricade Stop
Placement determines how the FULL STOP interacts with the support hand. Installed ahead of the hand, it can provide a forward limit and help prevent the hand from moving toward a hot barrel or muzzle area. Installed behind the hand, it creates a contact point for pulling the rifle into the shoulder. It can also be positioned between the fingers as a repeatable indexing surface.
The machined exterior can serve as a compact barricade stop when firing from an appropriate support. Its rigid aluminum construction gives the shooter a defined contact surface without requiring a large accessory on the bottom of the handguard.
Machined 6061-T651 Aluminum
DFCO machines the FULL STOP from 6061-T651 aluminum and protects it with a MIL-A-8625 Type III anodized finish. The aluminum body provides the rigidity desired for hand indexing and supported shooting while keeping the total weight down to 0.8 ounce.
The accessory measures 1.3 inches long, 0.6 inch wide and 1.36 inches high. That small footprint leaves surrounding M-LOK slots available for lights, sling mounts, bipods, switches and other equipment.
Olive Drab Green Anodized Finish
The olive drab green finish pairs naturally with ODG furniture, woodland equipment and rifles assembled with subdued field colors. It can also serve as a contrasting accent on black, tan or mixed-finish builds.
DFCO advises that anodized colors can vary between individual components. Differences in aluminum, surface preparation and production batches mean an exact shade match with receivers, handguards or accessories from another manufacturer should not be assumed.
M-LOK Installation and Placement
The FULL STOP mounts directly to a compatible M-LOK slot. DFCO recommends biasing the accessory toward the rear of the firearm so its rear recoil lug engages the rear of the M-LOK slot.
Use a 3/32-inch Allen bit and tighten the mounting screw to 25 inch-pounds. Do not exceed the manufacturer's stated maximum of 35 inch-pounds. Blue threadlocker is recommended.
Before live fire, confirm that the M-LOK nut is properly seated and that the accessory cannot slide, rotate or contact the barrel, gas block or another internal component.
Who Should Choose the ODG FULL STOP?
This FULL STOP is a strong choice for a shooter who wants a compact aluminum index point instead of a larger polymer forward control. It is particularly useful on short handguards, precision-oriented rifles that may be fired from barricades and builds where available M-LOK space is limited.
Choose the olive drab green version for a woodland, field or ODG-themed rifle. A larger grip may be preferable for someone who wants a full support-hand gripping surface rather than a compact stop.
Popular Pairings